The Wandsworth Disabled
Person's Call System is for the use in toilets and bathrooms and
fully complies with the guidelines outlined in BS8300:2001 Section:
12.4.10.
The system comprises of various components and is also available as a complete
'boxed' kit for ease of specification and ordering.
Wiring
Diagram
The panel would normally
be located in a centrally staffed area (eg.
reception) of the building and all toilet/bathroom
calls would be routed back for indication of
alarm calls.
Note: For larger systems or long distance wiring, please click
here to contact the Wandsworth
Technical Services department for advice on power supplies
required.
QD321 Call
unit
Can
be used within the toilet or bathroom as
an additional call point to the QD351 ceiling
pull.
Plate size: 86mm x 86mm
Box flush: 1702
Box surface: 1132
QD331 Single
overdoor lamp unit
Can
be used outside of the toilet or bathroom
facility to indicate remotely that a call
has been initiated within the toilet or
bathroom.
Plate size: 86mm x 86mm
Box flush: 1702
Box surface: 1132
QD340 Three
section indicator panel
3 x 1.1 watt indicator lamps
with amber lenses 22mm x 16mm.
Mini bleep-tone generator and rocker switch for
muting bleep-tone
Components wired to terminal block
Plate size: 172mm square
Box flush: 8306
Box surface: 8374
QD341 Six
section indicator panel
Generally as QD340 but containing
six indicator lights.
Plate size: 172mm square
Box flush: 8306
Box surface: 8374
QD351 Ceiling
pull - within
toilet cubicle
White
surface mounting ceiling pull
Integral reassurance lamp 2.5 watt with amber lens
3m red pull cord, complete with 2 x 50mm red 'bangles'
as specified in BS8300:2001
Unit fits BS31 box with 50.8mm centres
QD324Reset
unit - within toilet cubicle
Used
in conjunction with the QD351 ceiling pull
Front cover plate: 146mm x 86mm containing:
Reset push with integral reassurance lamp 1.1
watt with amber lens.
Front plate engraved 'RESET'
PCB with components wired to terminal block
Plate size: 86mm x 146mm
Box flush: 1703
Box surface: 1133
Front
cover plate: 146mm x 86mm containing:
One 2.8 watt MES lamp. (Lenses, QD337 are to be
ordered seperately)
Mini bleep-tone generator
Components wired to terminal block
Plate size: 86mm x 146mm
Box flush: 8302
Box surface: 8387
Lamp
lenses, 36mm square, are available in amber
(A), red (R), green (G), blue (B) or clear
(CL). Please specify colours and quantities
of each required.
QD153Power
unit - outside toilet cubicle
Input
230V 50Hz, an earth connection is required.
Rated output 1A 24Vdc. Output fuse 1A quick
blow 20 x 5mm (spare part No. XR603).
Size: 200mm long x 100mm wide x 100mm high
Weight: 1.5kg
